14
www.keysî‚¿tness.com
Assembly
9
J
D
E2
K1
K2
N5
P2
N3
N13
N14
L-(L)
N10
J
J1
D
ASSEMBLY FOR PEDAL JOINT COVER
Step 1:
Install left pedal joint cover (L-L) to conceal pedal arm connection and secure using
screw (N8).
Step 2:
Repeat step 1 on the right side with right pedal joint cover (L-R).
ASSEMBLY FOR CONSOLE
Step 1:
Remove the screws (J1) from the back of the console.
Step 2:
Connect the pulse wires, sensor wires and the toggle wires with the corresponding
wires on the console.
Step 4:
Gently slide the wires down the upright post and secure the console (J) to the upright
post (D) using the screws (J1).
ASSEMBLY FOR WATER BOTTLE HOLDER
Step 1:
Attach the water bottle holder (K2) and secure to the
upright post (D) using 2 screws (N5).
Step 2:
Place water bottle (K1) inside water bottle holder (K2).
ASSEMBLY FOR LEFT ROTATING HANDLEBAR
Attach the left rotating handlebar (E2) to the left rotating handlebar tube (P2) and se-
cure using 4 allen screws (N3), 4 spring washers (N13) and 4 flat washers (N14).
