Kenwood TK-360 Manual

next previous

CONTENTS

GETTING STARTED ................................................................................................1

GETTING ACQUAINTED .........................................................................................3

ROGRAMMABLE FUNCTIONS .............................................................................5

ASIC OPERATIONS ...............................................................................................6

CAN ........................................................................................................................7

MF CALLS ...........................................................................................................8

IGNALING ............................................................................................................10

5-TON

E SIGNALING ..............................................................................................10

FleetSync: A

LPHANUMERIC 2-WAY PAGING FUNCTION ...................................11

ADVANCED OPERATIONS ....................................................................................13

BAC

KGROUND OPERATIONS ..............................................................................16

GS-1 OPTIONAL VOICE GUIDE & STORAGE UNIT ..........................................17

PrecauTions

Observethefollowingprecautionstopreventre,personalinjury,andtransceiver

damage.

• Donotattempttocongurethetransceiverwhiledriving;itistoodangerous.

• Do not disassemble or modify the transceiver for any reason.

• Do not expose the transceiver to long periods of direct sunlight, nor place it near heating

appliances.

• If an abnormal odor or smoke is detected coming from the transceiver, switch the

transceiver power off immediately, and contact your Kenwood dealer.

•

Useofthetransceiverwhileyouaredrivingmaybeagainsttrafclaws.Pleasecheck

and observe the vehicle regulations in your area.

• DonotuseoptionsnotspeciedbyKenwood.

◆ The transceiver operates in 12 V negative ground systems only! Check the battery polarity and

voltage of the vehicle before installing the transceiver.

◆ Use only the suppl

ied DC power cable or a Kenwood optional DC power cable.

◆

Donotcutand/orremovethefuseholderontheDCpowercable.

For passenger safety, install the transceiver securely using the supplied mounting bracket and

screw set so the transceiver will not break loose in the event of a collision.