Zones
94
How Do I Operate Devices?
2. When the video and audio are output to Zone A only:
• To turn the receiver OFF (STANDBY mode), set the Zone setting
of the PowerTouch to Zone A then press the SYS.POWER button
on the PowerTouch.
• To output the video and audio to Zone B, set the Zone setting of
the PowerTouch to Zone B then press the SYS.POWER button on
the PowerTouch.
3. When the video and audio are output to Zone B only:
• To turn the receiver OFF (STANDBY mode), set the Zone setting
of the PowerTouch to Zone B then press the SYS.POWER button
on the PowerTouch.
• To output the video and audio to Zone A, set the Zone setting of
the PowerTouch to Zone A then press the SYS.POWER button on
the PowerTouch.
4. When the video and audio are output to both Zone A and Zone B:
• To turn the receiver OFF (STANDBY mode), set the Zone setting
of the PowerTouch to Zone A then press the SYS.POWER button
on the PowerTouch.
• To defeat the video and audio outputs to Zone B, set the Zone
setting of the PowerTouch to Zone B then press the SYS.POWER
button on the PowerTouch.
The receiver can also be turned OFF (STANDBY mode) by pressing the
POWER button on the receiver.
