43
EN
Receiver Operations
LISTEN MODE
Stereo
Listen Mode5/∞
Multi %
/
fi
/
@
/
#
Enter
ENTER
Dimmer
Sound
Sleep
RCV Mode
MULTI CONTROL %
/
fi
/
@
/
#
1 Press the RCV Mode key on the remote control unit to set
it to the receiver control mode.
2 Press the Sound key.
3
Press the MULTI CONTROL @ / # (or the Multi@ / # key) to
select the setting item and press the ENTER (or the Enter key).
Note that some items are not displayed in certain modes.
1 "SPEAKER LEVEL": *1
Adjusting the volume level of each channel
2 "ANALOG INPUT LEVEL": (Analog mode only) ¤
Input level adjustment
3 "TONE CONTROL": *2 ⁄
Tone level adjustment
4 "EFFECT LEVEL": (DSP mode only)
DSP effect level adjustment
5 "DUAL MONO": *3 r
Selection between Stereo, Main audio, Sub audio and
Main + Sub audio
6 "MIDNIGHT MODE": *4 t
Midnight mode adjustment
7 "PANORAMA": *5 r
Panorama mode ON/OFF
8 "DIMENSION": *5 r
Dimension adjustment
9 "CENTER WIDTH": *5 r
Center width adjustment
0 "CENTER
IMAGE
": *6 t
Center image mode adjustment
*1 The setting in the SOUND mode is temporary. It returns automati-
cally to the original level set in "Speaker settings" when the
receiver is turned OFF/ON.
*2 PCM stereo and analog stereo mode only.
*3 DOLBY DIGITAL mode only
*4 DOLBY DIGITAL, DTS mode only
*5 Only when the input signal is a 2-channel signal in the DOLBY PRO
LOGIC IIx MUSIC or DOLBY PRO LOGIC II MUSIC mode.
*6 Only when the input signal is a 2-channel signal in the DTS
NEO:6 MUSIC mode.
4 Use the MULTI CONTROL % / fi (or the Multi % / fi) to
adjust the setting as desired.
÷ The adjustment mode is displayed for approximately 20 seconds.
5 Press the Sound key again to return to the input indication.
You can make further adjustments to the sound while listening to
playback in the surround mode.
÷ The mode using Sound key is defeated when the REC MODE is
ON. ‹
Adjusting the sound
Adjusting the volume level of each channel
The volume levels of the center speaker, subwoofer, surround speaker
and surround back speaker channels can be adjusted during playback.
1 Press the RCV Mode key on the remote control unit to set
it to the receiver control mode.
2 Press the Sound key.
3 Use the MULTI CONTROL @ / # (or the Multi @ / # keys)
to select "SPEAKER LEVEL" on setup displays, and press
the ENTER (or Enter key).
4 Use the MULTI CONTROL @ / # (or the Multi @ / # keys)
to select the speaker.
1 Subwoofer level adjustment
2 Center speaker level adjustment
3 Surround speaker level adjustment
4 Surround back speaker level adjustment
5 Use the MULTI CONTROL % / fi (or the Multi % / fi keys)
to adjust the speaker volume level.
SP
L
+
E
S
1
A
d
S
K
B
O
E
U
R
/
/
ND
LE
R
+
V
S
1
E
d
L
B
÷ The level of each speaker channel can be adjusted in 1 dB
steps between -10 dB and +10 dB.
6 Repeat steps 4 and 5 as required.
7 Press the Sound key again to return to the input indication.
÷ The setting in the SOUND mode is temporary. It returns automati-
cally to the original level set in "Speaker settings" when the
receiver is turned OFF/ON.
Adjusting the DSP effect level
(DSP mode only)
The DSP effect level can be adjusted when the listen mode is a DSP surround
mode "Arena", "Jazz Club", "Theater", "Stadium" or "Disco".
1 Press the RCV Mode key on the remote control unit to set
it to the receiver control mode.
2 Press the Sound key.
3 Use the MULTI CONTROL @ / # (or the Multi @ / # keys)
to select "EFFECT LEVEL" on setup displays, and press
the ENTER (or Enter key).
4 Use the MULTI CONTROL % / fi (or the Multi % / fi) to
adjust the
EFFECT
LEVEL.
EFF
S
E
O
C
U
T
3
ND
LEVEL
÷
The DSP effect level can be adjusted in the range between 1 and 5.
5 Press the Sound key again to return to the input indication.
Convenient functions
*5489/38-45/EN 04.7.30, 10:40 AM43
