A SERVICE OF

logo

Open as PDF
next previous
English
|
19
Installing the Digital radio antenna
Antenna Installation
Checktheinstallationlocation.
Cleantheareawhereantennafilm
(Accessory6),amplifierunit(Accessory
7),andearthsheetarepastedwiththe
includedcleaner(Accessory9).
Thecoatingonthemetalsurfaceneed
notberemoved.
•Waituntiltheglasssurfaceis
completelydrybeforepasting.
•Iftheglasssurfaceiscold,suchas
duringwinter,warmitwithdefrosteror
dryer.
Removetheseparator(tagI)ofantenna
filmhorizontallyandpastetheantenna
onthefrontglass.
•Removetheseparatorgently.
•Donottouchthepastingsurface
(adhesiveside)oftheantennafilm.
Removetheseparator(tagII)ofantenna
filmverticallyandpastetheantenna
gentlywhileapplyingpressure.
Afterpasting,rubtheelementinthe
glasssurfaceinthedirectionofthearrow
showninthefiguretobondit.
Removetheapplicationfilm(tagIII).
•Donottouchthefeederterminalof
theelement.Also,donotapplyany
glasscleaner.
Feeder terminal
Matchtheprotrusionoftheamplifier
withthe5ontheantennafilmand
paste.
•Donottouchthefeederterminalor
thepastingsurface(adhesiveside)of
theamplifier.
• When installing the antenna on the
right side
Accessory7
Accessory6
Earth sheet
Match the protrusion with 5
B59-2188-10_01_13Stepup_QSG_M_En.indd 19 13/06/04 13:37