The messages shown below display your
No disc magazine has been loaded in
the changer. The disc magazine is not
Load the disc magazine properly.
No disc has been loaded in the disc
Load a disc into the disc magazine.
The CD is quite dirty. The CD is upside-
down. The CD is scratched a lot.
Clean the CD and load it correctly.
Nothing has been recorded on the MD.
No tracks are recorded on the MD,
The unit is malfunctioning for some reason.
Press the reset button on the unit. If
the "Error-77" code does not disappear,
consult your nearest service center.
Something is wrong with the disc
magazine. Or the unit is malfunctioning for
Check the disc magazine. And then
press the reset button on the unit. If
the "Error 99" code does not disappear,
consult your nearest service center.
The protective circuit in the unit activates
when the temperature inside the
automatic disc changer exceeds 60°C
(140°F), stopping all operation.
Cool down the unit by opening
the windows or turning on the air
conditioner. As the temperature falls
below 60°C (140°F), the disc will start
Attempted to display DNPS during the CD
play having no disc names preset..
Discs are being exchanged in the Disc
The unit is reading the data on the disc.
The CD player section is not operating
Reinsert the CD. If the CD cannot be
ejected or the display continues to flash
even when the CD has been properly
reinserted, please switch off the power
and consult your nearest service center.
The tape player section is not operating
Reinsert the Tape. If the tape cannot be
ejected or the display continues to flash
even when the tape has been properly
reinserted, please switch off the power
and consult your nearest service center.
A MP3/WMA is played with a format that
A copy-protected file is played.
