Because authorization by the Security Code is
required when it’s removed from the vehicle,
personalizing this unit is by using the Security
Code is a help in preventing theft.
When the Security Code function is activated, the code
can’t be changed and the function can’t be released.
Note, the Security Code can be set as the 4 digit number
Select the Security Code mode
Press the [FM+] or [AM–] button.
Select the "CODESTBY" display.
Press the [COL] button for at least 2 seconds.
When "WRITE" is displayed, "CODE ****" is
Press the [1] — [4] button.
Example: If the Security Code is "3510".
Confirm the Security Code
When "WRITE" is displayed, "1 CODE **** " is
Do the steps 3 through 4, and reenter the
The Security Code function activates.
When a Code different from step 3 is entered, repeat
Press the Reset button and when it’s removed
from the battery power source
Do the steps 3 through 4, and enter the
You can set to mute the sound when a call comes
Built-in Auxiliary input Setting
Set the Built-in Auxiliary Input function.
When selecting the source there’s no Auxiliary Input.
When selecting the source there’s no Auxiliary Input.
When selecting the source there’s Auxiliary Input.
When selecting the source there’s Auxiliary Input.
Built-in Amp Mute Setting
Toggles ON or OFF the mute control on the built-
Turning ON this control enhances the preout
The built-in amplifier activates.
The built-in amplifier activates.
The built-in amplifier deactivates.
The built-in amplifier deactivates.
Mute the audio sound during Voice Guidance of
