13
TIMESHIFT (TIME-SHIFTED VIEWING)
If you cannot catch the beginning of a programme because you are occupied with something else, or if you
have to take a break from watching while a programme is being broadcast, you can watch it in timeshift
mode. Press the
button to activate this mode. The following display will appear:
You can change the following settings for
timeshifted recording:
Use the
buttons to select the set-
tings to be changed. Effect changes using
the
buttons and number keys.
Time-shifted segment
already viewed (see
time display →02:33
min)
Remaining timeshift
buffer
(see time display →
01:54:18 h)
Difference between the time-shifted
segment and the live broadcast (see
time display →03:09 min)
- Target: If more than one storage medium is connected to the receiver or if a storage medium with several
partitions has been connected, you can select the storage medium or partition on which the record
ings are to be stored.
- Start: Time of start (can also be entered with the keypad)
- End: End time can also be entered with the keypad in case the standard recording time (two hours) is
not long enough or too long.
Once all settings have been made, use the
buttons to access the line “ Start Timeshift (xxx min)”.
Press
to start recording.
The receiver continues recording the programme in the background while you see a freeze-frame.
You can also modify the recording time while recording is being effected, as described in “Save/extend
timeshift“. The receiver will display “II” and “REC”.
Press the
button to start timeshifted viewing. The following display will appear (Example):
