MasterPage: Heading0_Left
36 EN
FEATURES FOR RECORDING
LED Light can be used to
brighten the subject in the dark
place during video recording or
D.S.C. shooting.
1 Press LIGHT repeatedly to change the
setting.
2 Press the Recording Start/Stop Button to
start video recording or SNAPSHOT to shoot a
still image.
NOTES:
●
Be careful not to point the LED Light directly to
eyes.
● If the light does not reach the subject when the
LED Light setting is “ON”, the Night-Alive
function will be activated, and makes it possible
to shoot the subject brighter.
● Since subjects are shot at a reduced shutter
speed when the LED Light setting is “ON”, they
will appear slightly blurred.
This feature is useful for recording or playing
back precious or hard-to-see moments at a
slow speed. Sound is recorded and played
back in real time.
1 Set the VIDEO/MEMORY Switch to
“VIDEO”.
2 Set the Power Switch to “REC” or “PLAY”.
●
If set to “REC”, the recording mode should be
set to
“ ”. (੬ pg. 20)
3 Set “SNAP/SLOW” to “SLOW”. (੬ pg. 33)
The Live Slow indicator “ ” appears.
4 Press SLOW during recording or playback.
●
The moving pictures are divided into four
frames. They are recorded or played back for
1.5 seconds, and then normal recording or
playback resumes.
NOTES:
● This feature is effective when the recording
mode selection is set to both “
” or “ ”.
● Live Slow cannot be used when the 16:9 Wide
mode is selected.
LED Light
The light is on always. ( appears.)
The light turns on automatically
when dark. ( appears.)
Turns off the light.
LED Light
LIGHT
Live Slow
GR-D790US.book Page 36 Tuesday, November 7, 2006 1:39 PM
