A SERVICE OF

logo

54
XP662 MANUAL Helicopter
SYSTEM MODE
CHAPTER 5: INPUT MODE AND FUNCTION
Helicopter
5.2
NORMAL DISPLAY5.1
When the power switch is turned on, the screen will
read as shown here in the diagram. This screen is
referred to as the normal display.
To enter the System mode, press the SCROLL and
INCREASE buttons simultaneously while you turn on
the transmitter. You can now select any of eight
system mode functions shown here in the flow chart.
To exit the System mode, press the SCROLL and
INCREASE buttons simultaneously or turn off the
transmitter. Press the SCROLL button to move
through the system mode functions. Information for
each function is located on the page number listed
next to the function name.
I0.4V
HE I
MODEL NUMBER
AC = FIXED WING AIRCRAFT
HE = HELICOPTER
BATTERY VOLTAGE
I
MDL
I
HEI
I
SPC
HO
FST
HE
TYP
HE
RST
E.A
SW
D/R
F
GER
OF
FSI
MODEL TYPE SELECTION
Page 56
DATARESET Page 57
DUAL RATE SWITCH
SELECTION
Page 58
GEAR/GYRO GAIN
SWITCH SELECTION
Page 59
MODEL SELECTION Page 60
MODEL NAME ENTRY
Page 61
MODULATION SELECT
Page 63
Page 65
*
(S-PCM)
*
(Z-PCM)
FAIL-SAFE
FAIL-SAFE MEMORY
V
Page 68
Only visible when modulation type
is selected for SPCM or ZPCM
PCM modulation is selected