JHD1000
4
AUXIN
1
23
4
5
6
HEAVYDUTY
TUNE
BAND
TUNE
AUDIO
ADJUST
MODE
T
F
/
PUSHPOWER
JHD1000
1&4
3
5
2
6a
6b
6c
7
8
Basic Operation
1. Power
Press the power button (1) to turn the unit on or off.
2. Liquid Crystal Display
The Liquid Crystal Display (LCD) panel (2) displays the frequency, time and activated functions.
3. Mode
Press
MODE
(3) to select a different mode of operation as indicated on the display panel.
Available modes include radio band and auxiliary input (AUX).
4. Volume
To adjust the volume, rotate the volume control knob (4) clockwise (to increase volume) or
counter clockwise (to decrease volume).
5. Sound Adjustment
Press AUDIO ADJUST (5) repeatedly to step through the following sound adjustment options:
Bass, Treble, Balance (left to right) and Fader (front to rear). When the desired option appears
in the display, rotate the volume control knob to adjust that audio feature. When no adjustments
have been made for five seconds, the unit will resume normal operation.
Note: There is no fader adjustment option during 2-speaker operation.
6. Setting the Clock
To set the clock to display the current time, turn the vehicle ignition on and turn the radio off.
Press T/F (6a) for more than one second, and the time will flash in the display. Press the down
tuning button (6b) to adjust the hours or the up tuning button (6c) to adjust the minutes. “A” or
“P” will appear on the display to indicate AM or PM. When no adjustment is made for five
seconds, the time will be set and normal operation will resume.
7. Alarm Clock Function
Setting the Alarm Clock
This unit has an alarm clock function that can be set to turn the unit on at a specific time. To set
the alarm clock, turn the vehicl
e ignition on and turn the radio off. Press the alarm button (7) for
longer than one second, and the time will flash in the display. Press the down tuning button (6b)
to adjust the hours or the up tuning button (6c) to adjust the minutes. “A” or “P” will appear on
the display to indicate AM or PM. When no adjustment is made for five seconds, the time will be
set and normal operation will resume.
Alarm Clock On/Off Selector
Press the alarm button momentarily to turn the alarm function on or off. The bell symbol will
appear in the display when the alarm function is on. To check the time for which the alarm is set,
press the alarm button for more than one second, and t
he time will flash in the display. After five
seconds, the display will stop flashing and the unit will return to normal operation.
Note: When the alarm feature is activated, the unit will turn on even if the ignition is off.
The mode of operation (radio or auxiliary input) and volume level that were last used will
be automatically recalled. The unit will automatically turn itself off after five minutes.
8. Auxiliary Input Function
Insert a standard 3.5 mm (audio line output or headphone output from your portable CD / MP3 /
iPod or other media player) into the "AUX-IN" jack (8) on the front of the unit. If your media
player does not include an audio out cabled, us
e the Aux Cable included with this unit.
Basic Operation
