Invacare XLTPro Manual

A SERVICE OF

next previous

SECTION 6—RIDING POSITION

Recumbent Handcycle Series 40 Part No 1114850

Adjusting Back Angle - XLT Gold

NOTE:Forthisprocedure,refertoFIGURE 6.10.

1. Loosen,butDONOTremove,thetwosocketscrewslocatedintheseatangle

adjustmentclamp.

2. Performoneofthefollowing:

• IncreasingBackAngle‐Whilepushingdownonthebacksupporttube,pushthe

backdowntothedesiredposition.

• DecreasingBackAngle‐Whileliftinguponthebacksupporttube,pulltheback

upwardtothedesiredposition.

3. Securelytightenthetwosocketscrewslocatedintheseatangleadjustmentclamp.

FIGURE 6.10 Adjusting Back Angle - XLT Gold

Back Support Tube

Socket

Screw

Adjustment Holes

NOTE:Wheelnotshownforclarity.