Invacare R51LX Manual

A SERVICE OF

next previous

SECTION 6—FRONT RIGGINGS

Nutron® Series 31 Part No.1106645

SECTION 6—FRONT RIGGINGS

ƽ WARNING

After ANY adjustments, repair or service and BEFORE use, make sure that all

attaching hardware is tightened securely - otherwise injury or damage may result.

Installing/Removing the Footrests

NOTE:Forthisprocedure,refertoFIGURE 6.1.

Installing

1. Turnfootresttotheside(openfootplateisperpendiculartowheelchair)andposition

mountingholesinthefootresthingeplateswithhingepinsonthewheelchairframe.

2. Installthefootresthingeplatesontothehingepinsonthewheelchairframe.

3. Pushthefootresttowardstheinsideofthewheelchairuntilitlocksintoplace.

NOTE:Thefootplatewillbeontheinsideofthewheelchairwhenlockedinplace.

4. RepeatSTEPS1‐3fortheoppositesideofthewheelchair.

Removing

1. Pushthefootrestreleaseleverinwardandrotatethefootrestoutward.

2. Liftuponfootrestandremovefromthewheelchair.

3. RepeatSTEPS1‐2fortheoppositesideofthewheelchair.

FIGURE 6.1 Installing/Removing the Footrests

Footrest Release Lever

Hinge Pins

Footrest Hinge Plate