A SERVICE OF

logo

Open as PDF
next previous
Electronics - MK5 NX Controllers and Battery Chargers
Item
Number
Part Number
DescriptionNote
Quantity Per
Package Assembly
1127302 Kit, Controller Mounting Hardware 1 11 A
Cable Tie (5-5/8" Long) 1 142
Locknut (#8-32) 1 23
Screw, Phillips Pan Head (#8-32 x 1") 1 24
Cable Tie (17-1/2" L) 1 25
1109531 Controller, MK5 NX-LP 1 16 F
1109530 Controller, MK5 NX 1 16 G
1127270 Controller, (MK5 NX w/ ACC) (MK660 w/ ACC) 1 16 H,J,J1
1127301 Kit, Charger Mounting Hardware 1 17 B
Nut, Hex Keps (#4-40) 1 28
Screw, Phillips Pan Head Tap (#10-32 x 1/2") 1 39
Bracket, Charger Plug 1 110
Screw, Phillips Pan Head (#4-40 x 7/16") 1 211
Cover, Connector 1 112
1118923 Battery Charger with Power Cord
3 Amp. (On-Board)
1 113 I
1109091 Programmer, Remote 1 114
1123249 Battery Charger, 8 Amp. 115vac (Off Board)
Single Mode Round Plug w/ AC Power Line Cord,
CTE Corp.
1 115 C,D
1089627 Cord, AC Power Line 115vac (2-prong off-board
11'6"L)
1 116
1053161 Battery Charger, 8 Amp. 115vac (Off Board)
Dual Mode Round Plug, Lester
1 117 E
1121086 Cord, AC Power Line 115VAC (3-prong on-board
6'6-1/2"L)
1 118
A - Includes items 2-5, does not include controller
B - Includes items 8-12
C - Used on Gel Cell or AGM (Absorbed Glass Mat) batteries. For wet cell batteries refer to the Lester 8 amp charger
D - Includes item 16, AC power cord
E - Used on Wet Cell batteries
F - Used on M50 models
G - Used on M51 models
H - Used on M61 models
I - On Board charger is included as a standard feature.
J - The MK5 NX w/ ACC controller was revised to function as a MK660 w/ ACC 10/9/06. A MK660 w/ ACC is backward
compatible with MK5 electronics.
J1 - Any controller in the field manufactured for chairs before 10/9/06 with a controller label description MK5 NX w/ ACC "will
not" be compatible with MK6i electronics. This note was provided because the part number remained the same.
NOTE:
107
To order call toll free 1-800-333-6900, or www.invacare.com
Form No.
04-050