![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/d/aa/daadaff4-ea2c-499a-a9d8-e0925a3b3059/daadaff4-ea2c-499a-a9d8-e0925a3b3059-bg1c.png)
SECTION 6—FRONT RIGGINGS
Adjustable ASBA Seat 28 Part No 1143238
Adjusting/Replacing Telescoping Front Rigging Support
ƽ WARNING
If the telescoping tubes need to be extended greater than two inches, then the seat
MUST be repositioned rearward to ensure stability - otherwise personal injury and/
or damage to the wheelchair and surrounding property may result.
NOTE:Forthisprocedure,refertoFIGURE 6.8.
1. Removethetwocapscrews,spacersandthreadedblockssecuringthetelescoping
fronttubetothesiderail.
2. Performoneofthefollowing:
• Slideexistingtelescopingfrontriggingsupporttooneofsixdepthpositions.
•Removeexistingtelescopingfrontrigging.
3. Securethetelescopingfronttubetothesiderailatthedesireddepthwiththeexisting
twocapscrews,spacersandthreadedblocks.
4. RepeatSTEPS1to3ontheoppositesideifdesired.
FIGURE 6.8 Adjusting/Replacing Telescoping Front Rigging Support
Telescoping
Front Tube
Cap Screws
Spacers
Threaded
Blocks
Cap Screws
Spacers
Side Rail
Side Rail