Page 11 of 14 Rev: 1/21/2014 7:47 AM
100VAC to 240VAC (+/- 10%)
50/60Hz auto detected at power-up
Maximum load
10A – 240VAC (AUS/NZ)
3600W/240VAC Resistive
700W/240VAC Inductive/Capacitive
2000W/240VAC Bulbs/Low Voltage Halogen
Load type(s)
Inductive/capacitive
Low voltage halogen
Retains all settings without power
Yes, saved in non-volatile EEPROM
Standby power consumption
Certifications
AS/NZS 4268, CISPR 22
IEC 60669-2-1
All product specifications are subject to change.
Troubleshooting
On/Off Module LED is not turning
on
On/Off Module is not
getting power
Make sure On/Off Module is not
plugged into a switched outlet that is
On/Off Module won’t add to a
scene as a controller or responder
On/Off Module or the
controller is plugged into a
power strip or AC line filter
Powerline signals can’t travel through
some power filters. Plug On/Off
Module or controller into an
The INSTEON signal may
be too weak
Add additional INSTEON devices or
move around existing INSTEON
devices. All INSTEON devices act as
INSTEON network repeaters.
Large appliances, such as
refrigerators or air
conditioners, may be
producing electrical noise
