ASSEMBLY INSTRUCTION
Tools Required For Assembling the Bike: One Crossing Wrench and Allen Wrench,
provided by manufacturer.
NOTE: It is strongly recommended that two or more people assemble this bike to
avoid possible injury.
STEP-1
A.) Do not tighten Bolts until instructed to do so.
B.) Thread two Level Adjustment Knobs (#8) each onto the Front & Rear Stabilizer (#2 & #3).
C.) Attach the Front Stabilizer (#2) to the Main Frame (#1). Secure it with two M8 x 2 ¾” Carriage Bolts
(#16), two Ø 5/8” Curved Washers (#17), and two M8 Acorn Nuts (#18).
D.) Attach the Rear Stabilizer (#3) to the Main Frame (#1). Secure it with two M8 x 2 ¾” Carriage Bolts
(#16), two Ø 5/8” Curved Washers (#17), and two M8 Acorn Nuts (#18).
E.) Securely tighten all Bolts.
F.) Adjust the Level Adjustment Knob to stabilize the Bike on floor.
G.) Thread the Right Pedal (#15) clockwise onto the right Crank (#38).
H.) Thread the Left Pedal (#14) counterclockwise onto the left Crank (#38)
© IMPEX INC.
6
