Hunter Fan 42724-01 Manual

next previous

12345-01•12/06/07•HunterFanCompany

7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)

Installing the Glass Bowl

7-8. FirstinstallB10candelabrabulbs(60WattMaximum)intothe

sockets.

7-9. Attachtheextrapullchain(included)tothefanpullchainusing

the plastic breakaway connector. (You may ﬁnd the plastic

breakaway connector on the end of the extra chain.)

7-10. read the fan pull chain through the hole in the metal disk. en,

thread the fan pull chain through the hole in the center of the glass

bowl.

7-11. read the light pull chain through the hole in the center of the

glass bowl. en, read the light pull chain throught the hole in

the center of the cover plate.

7-12. read the fan pull chain through the grommet hole in the side of

the cover plate.

7-13. Place the cover plate up against the

glassbowl.Aligntheholesinthecover

plate and glass bowl.

7-14. read the light pull chain through

the ﬁnial and screw the ﬁnial onto the

threaded rod end until tight.

Breakaway

Connector

Light Bulbs

(B10

Candelabra

Base60Watt

Maximum)

MetalRod

Metal Disk

GlassBowl

Cover Plate

Finial