– 62 –
Quick Guide To System Functions (cont’d)
FUNCTION PROCEDURE COMMENTS
Delete a User Enter master/manager code.
Press CODE [8].
Enter user no. to be deleted.
Enter master/manager code.
Press 1 (Yes) at prompt.
Master & Manager level users can delete users.
A user can only be deleted by a user with
higher authority level.
Enter security code. Press [#]
Enter 71 or 72.
Activate output device as programmed.
Enter security code. Press [#]
Enter 70.
Activate output device manually
Control Output
Device
Enter security code. Press [#]
Enter 77.
Activate output device or system event instantly
Enter security code. Enter 0. Activate access relay for current partition.
Enter security code
Press [#]. Enter 73.
Request to enter or exit at a console.
Enter security code
Press [#]. Enter 74.
Enter access point number.
Request to enter or exit at an access point.
Enter security code. Press [#].
Enter 75. Enter access point
number.
Enter state (1-3)
Change the access point state.
Access Control
Enter security code
Press [#]. Enter 79.
Perform an access control card function.
