UV100E ULTRAVIOLET AIR TREATMENT SYSTEM
69-1442-1 6
6.
Wipe
our lamps with a clean, dr
cloth.
7.
Put
our clean lamps back into the unit base b
followin
Replacin
Your Lamps
Annuall
section steps 5, 6, and 7.
WARNING
UV Light Hazard.
Harmful to bare skin and eyes.
Can cause temporary or permanent loss of vision.
Never look at the lamps while illuminated.
Onl
view illumination b
wa
of the li
ht indicator located on the lamp knob.
To prevent exposure to ultraviolet li
ht, disconnect power to the ultraviolet air
treatment s
stem before servicin
an
part of the heatin
/air conditionin
s
stem.
8.
Plu
the cord into the nearb
120 Vac electrical outlet.
9.
Verif
that the ultraviolet lamp
s
are operatin
only
b
viewin
throu
h the lamp
li
ht indicator on the lamp knob.
Never look directly at your lamps while
illuminated
.
10.
Reconnect the power to
our HVAC s
stem.
CAUTION
UV Lamp Burn Hazard.
Harmful to bare skin.
Can cause severe burns.
Disconnect power 15 minutes before removin
the ultraviolet lamp
s
.
IMPORTANT
If the lamps in your model have external wires running along the glass
surface, be sure to avoid pulling on those wires.
Replacing Your Lamps (Annually)
Annual replacement of
our lamps is re
uired. To replace
our lamps:
1.
Select and obtain the correct replacement lamp for
our unit. See Table 1.
2.
Disconnect the power to
our HVAC s
stem.
3.
Unplu
our ultraviolet air treatment s
stem cord from the electrical outlet and
allow the lamps to cool for at least 15 minutes.
4.
Rotate the lamp knob counterclockwise and
entl
pull the lamp knob to remove
the lamp
s
.
5.
Insert the lamp into the base unit with the lamp li
ht indicator at the eleven
o’clock position
left of the raised button on the unit cover
.
Do not touch the
lamp surface with your hands
.
