F116 (SERIES 16000) SELF-CONTAINED DUCTABLE COMMERCIAL AIR CLEANER
11
68-0200-2
THREADED
ROD
HEX BOLT
LOCK
WASHER
TOP OF
AIR CLEANER
CABINET
JAM
NUT
JAM NUT
3/8 x 16T
EYEBOLT
CHAIN
3/8 x 16T NUTS INSTALLED
IN CABINET CORNERS
FASTEN SECURELY TO STRUCTURAL SUPPORT SYSTEM
I.E. BAR JOIST, CONCRETE SLAB, TIMBER FRAMING, ETC.
ALL EXTERNAL HARDWARE
FURNISHED BY OWNER.
M10802
Fig. 13. Fastening air cleaner to a structural support
system (bar joist, concrete slab or timber framing).
Install with Ducting
Use a transition or box plenum to attach the ducting to air
cleaner inlet. A transition plenum is preferred. See Fig. 14. A
diffusion screen must be installed when a box plenum is
used. See Fig. 15. A box plenum can accommodate more
than one inlet.
M7793A
AIR CLEANER
Fig. 14. Transition plenum connected to the
air cleaner inlet.
DIFFUSION
SCREEN
M10803
AIR
CLEANER
Fig. 15. Box plenum with diffusion screen and three inlets
connected to the air cleaner.
M7792A
AIR CLEANER
SQUARE-TO-ROUND
CONNECTION
Y-BRANCH
Use a square-to-round or square-to-square connection
when attaching the air cleaner outlet to the blower
discharge flange. See Fig. 16. The outlet connection can
be used with a Y-branch, distribution box or manifold as
required.
Fig. 16. Square-to-round connection attached to the air
cleaner outlet.
Wire
All wiring must comply with applicable codes and
ordinances. The power source must agree with the air
cleaner electrical rating (120 Vac, 60 Hz; 220 Vac, 50/60 Hz).
1. Connect the power. See Fig. 17.
IMPORTANT
Ground the air cleaner for proper operation and
safety.
2. Turn on the power and check that the blower
operates at all three speed settings.
3. Check that the ON indicator lights when the fan is
operating.
4. Turn off the power and install the filters in the cabinet.
NOTE: Select models have a disposable aluminum
spacer. The spacer is necessary only when
using the CPZ™ modules. All other filters
need to remove and save the spacer for
future needs.
5. Replace the air cleaner cover.
Fig. 17. F116A1021, F116A1047 and F116A1120 (120 Vac,
60 Hz); F116A1122, F116A2048, F116A2121 (220Vac, 50/60
Hz) air cleaner typical wiring diagram.
BLACK (HIGH)
BLUE (MEDIUM)
RED (LOW)
BROWN
BROWN
BLOWER
MOTOR
GROUND
GROUND
LINE
120 VAC
OIL FILLED CAPACITOR —
CHECK NAMEPLATE FOR
CORRECT VALUE
WHITE (COMMON)
M10805
