ORDERING INFORMATION AND SYSTEM CHECKLIST
Litho in USA
DISTRIBUTED BY:
TYPICAL INSTALLATION FOR SPOOL GUN TO WELDER REQUIRING AN SGA SPOOL GUN ADAPTER
SPOOL GUN CONTROL
SGA 100 #043 856
Required to connect spool gun to
the Handler
®
135, 140, 175, 180 or
187. Allows you to connect a spool
gun to virtually any similar MIG
welder—Hobart or other brands.
Includes 10 ft (3 m) 115 VAC
power cable and plug, 6 ft (1.8 m)
interconnecting cable, and 5 ft
(1.5 m) gas hose.
CONSUMABLES
Power Source Stock No. Description Qty. Price
Spool Gun 3035-20 #300143 Includes 20 ft (6.1 m) cable
UPC: #715959355650; Shipping Weight: 12 lb (5.5 kg); Carton Dimensions: 15-1/2 x 15-5/8 x 3-5/8 in (394 x 397 x 92 mm)
Spool Gun 3545-20 #300144 Includes 20 ft (6.1 m) cable
UPC: #715959355667; Shipping Weight: 13 lb (5.9 kg); Carton Dimensions: 15-1/2 x 15-5/8 x 3-5/8 in (394 x 397 x 92 mm)
SGA 100 Spool Gun Control #043 856
Consumables See above
Date: Total Quoted Price:
Consumables For Spool Gun 3035-20
Note: Spool Gun 3035-20 shipped with (3) .030 in and
(3) .035 in contact tips.
Contact Tips (5 per package)
#199 730 For .023 in (0.6 mm) wire.
#186 419 For .030 in (0.8 mm) wire.
#186 406 For .035 in (0.9 mm) wire.
Nozzle #186 405
Drive Roll (1)
#199 731 For .023 in
(0.6 mm) wire.
#186 413 For .030/.035 in
(0.8/0.9 mm) wire.
Push Roll (1)
#199 732 For .023 in
(0.6 mm) wire.
#186 414 For .030/.035 in
(0.8/0.9 mm) wire.
Consumables For Spool Gun 3545-20
Note: Spool Gun 3545-20 shipped with (3) .035 in and
(3) .047 in contact tips.
Contact Tips (5 per package)
#199 387 For .030 in (0.8 mm) wire.
#199 388 For .035 in (0.9 mm) wire.
#199 389 For .047 in (1.2 mm) wire.
Nozzle #199 386
Drive Roll (1)
#186 413 For .030/.035 in
(0.8/0.9 mm) wire.
#199 396 For .047 in
(1.2 mm) wire.
Push Roll (1)
#186 414 For .030/.035 in
(0.8/0.9 mm) wire.
#199 397 For .047 in
(1.2 mm) wire.
For Handler
®
140, combine Spool Gun 3035-20 with
SGA 100 to weld 14 gauge to 1/8 in aluminum.
For Handler
®
187, combine Spool Gun 3035-20 with SGA
100 to weld 14 gauge to 1/4 in aluminum.
To weld aluminum with comparable, competitive
power sources, the spool gun may also be used with
the SGA unit.
Note: Refer to SGA Owner’s Manual for complete
installation instructions.
