22. Confirm all settings, then press the SELECT button to
move on to the next SETUP screen.
23. Select “YES” to setup another device or select “No,
thanks, I’m done” to exit the AV Net setup.
Learning Mode (Example: CUSTOM/DVD 3 Setup)
1. Press the SELECT button to start the SETUP
WIZARD.
2. Use the CURSOR PAD ̆ or ̄ to highlight NO.
3. Press the SELECT button to select “NO”.
(Select NO to setup other devices).
4. Use the CURSOR PAD ̇, ̈, ̆ and ̄ to highlight
NEXT, then press the SELECT button to move on to
the next SETUP screen.
5. CURSOR PAD ̇, ̈, ̆ and ̄ to highlight “Custom”,
then press the SELECT button to select.
6. Select NEXT to continue.
Congratulations!
Your A/V Receiver is now
connected to your AV network.
AV Net Setup Wizard : A/V Receiver Setup
Move
Would you like to setup another device?
YesNo thanks, I’m done.
SEL
Select
Welcome to the AV Net Setup Wizard.
Before starting this wizard, please make sure
that all devices are connected appropiately
and the IR blasters are placed in front of the
devices IR sensor.
AV Net Setup Wizard
Move
SEL
Return
Back
Start
