A SERVICE OF

logo

Commands 153
Commands
BCmp 0 The Byte compare option is not supported, so this bit must be 0.
Fixed 0 The Verification Length field specifies the length of the data to be verified in bytes.
1 The Verification field specifies the length of the data to be verified in blocks. The size of
each block (in bytes) is specified by the current block length specified in the Mode
Parameter block descriptor.
Verification
Length
0 No data is verified. This is not considered an error and the current logical position will be
unchanged.
>0 The amount of data to be verified, in bytes or blocks as specified by the Fixed field.