36 Installation and operation
EN
Operating environment
The environmental requirements listed below must be maintained to
ensure the proper operation of the HP LaserJet 3100/3150 product.
Consider the following before installing the printer:
● Install in a well-ventilated, dust-free area.
● Install on a hard, flat, continuous surface, with all four feet level.
Do not install on carpet or other soft surfaces.
● Ensure adequate power is supplied.
Note Uninterruptible power supplies (UPS) may be used with the
HP LaserJet 3100/3150 product.
● Install away from direct sunlight, open flames, or ammonia fumes.
If the HP LaserJet 3100/3150 product is placed near a window,
make sure the window has a curtain or blind to block direct
sunlight.
● Install with enough space around the product for proper access
and ventilation.
● Install away from the direct flow of exhaust from air ventilation
systems.
Table 7. Environmental requirements
Category Requirement
Operating (working or
standby)
Temperature: 59 to 90.5 degrees Fahrenheit
(15 to 32.5 degrees Celsius)
Humidity: 10 to 80 percent relative humidity (no condensation)
Non-operating Temperature (toner cartridge): -4 to 104°F (-20 to 40°C);
Temperature (product): -4 to 140°F (-20 to 60°C)
Humidity: 10 to 90 percent relative humidity (no condensation)
Normal storage Temperature: 32 to 95°F (0 to 35°C)
Humidity: 35 to 85 percent relative humidity
