![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/c/4b/c4bc903c-24e0-4f4e-9efc-7cfc2778e2b8/c4bc903c-24e0-4f4e-9efc-7cfc2778e2b8-bg13.png)
Front Load Washing Machine Model:HW-C1260/1460TVE/ME-U
15
Error message :The heater may be broken
Troubleshooting:
N
Y
Y
Error message:The required water level is not reached within 8 min.
Troubleshooting:
N
Check if inlet valve is jammed
Clean inlet valve
N
Check if tap is closed or water pressure is too
low (usual between0.03 -1 MPa)
Open the tap or wait for normal water pressure to use
Y
Y
Check if water is leaking from washer
bottom. inlet pipe. drain pipe or other
pipe connection
Y
Readjust or replace the broken parts
N
Cut off power ,check the resistance
Of two pins of heater element by
multimenter is it between 32-35
Ω ?
Turn on power ,and set wash
mode,then start ,check the export
voltage of heater element between
12-6 and J9-9 ,is it between AC
220-240V?
Heater element
must be broken
please replace
it
Computer
board must be
broken, please