- 12 -
5.3 Programming the HMM 470 modulator module
Notes:
– Entries are saved by pressing the
button.
—> You will be returned to the item “Selecting the module/channel strip”.
– The programming process can be cancelled by pressing and holding the
button.
—> You will be returned to the item “Selecting the module/channel strip”.
Switch on the head-end station.
—>
The display shows “SETUP BE160” and the software
version of the head-end station (e.g. V 7).
—>
In the “
SETUP
” menu, the output level of the output
collector can be adjusted
(see STC 160 assembly instructions).
Selecting the module / channel strip
•Press
repeatedly if necessary to select the particular
module (Bx …) or channel strip
“A”, “B”, “C” or “D”
to be
programmed.
•Pressthe
button to activate the channel strip.
—>
The display shows this menu (for example)
“Bx 2A 4 AV MONO C21 “:
“Bx“ indicates the slot
“2“ indicates slot no. 2
”A” indicates channel strip “A”
”C21” indicates the HF channel set
C5 12 S
C5 2 S3
B
Ein/On
SETUP
A
C
BE160
V 7
M
/
…
OU
Bx 2B
4 AV MONO
C23
Bx 2A 4 AV MONO
C21
BE
7
M M
/
Bx 2A
2
UT U
i
o / off
