A SERVICE OF

logo

Open as PDF
next previous
Publication No. GEG-99141 Genicom Apr 02
7-12 GENICOM Intelliprint cL160 User Guide
PS Menu
PS Menu
The PS Menu provides access to the PostScript settings. Use the following procedure to enter the
PS Menu:
1. Press the MENU button on the control panel.
2. Press the NEXT button until the text “PS Menu” is shown on the second line of the
display.
3. Press the SELECT button to enter the PS menu.
Network 1 Setup
This submenu allows you
to set up the Network
interface.
Interpreter:
Auto Switch
Format:
Raw
Network
Channel:
Netware
Network
Address:
IP Address:
(user-specified)
Subnet Mask:
(user-specified)
Default
Router:
(user-specified)
LPD Banner:
On
DHCP:
Off
Network
Frame:
Auto-Sense
Delay Out
Close:
Off
Interpreter:
Auto Switch
PCL
PostScript 3
Format:
Raw
Normal
Binary
Network Channel:
DEC LAT, AppleTalk,
TCP/IP
Network Address:
IP Address:
(user-specified)
Subnet Mask:
(user-specified)
Default Router:
(user-specified)
LPD Banner:
On
Off
DHCP:
Off
On
Network Frame:
802.3, Ethernet II,
802.2 SNAP, 802.2
Delay Out Close:
Off
On
1. Press NEXT or PREVIOUS to move among the
submenus.
2. Press SELECT to choose a submenu.
3. Press NEXT or PREVIOUS to scroll through the
settings.
4. Press SELECT to save this setting.
Submenus Default
Setting
Available
Settings
Procedure for Changing Setting