OPERATION CONTROLS AND FUNCTIONS
PC INPUT: RGBHV VGA/SVGA/XGA/SXGA/UXGA/WXGA/WSXGA/WUXGA
VGA@ (60//72/75/85/SVGA @ (56/60/72/75/85)
XGA @ (60/70/75/85)/SXGA @ (60/75/85)/UXGA @ 60/
WXGA @ 60(1280x800)/WSXGA @ 60(1680x1050)
WUXGA @ 60(1920x1200)/1360x768
HDMI INPUT: Digital VGA @ (60/72/75/85)/SVGA @ (56/60/72/75/85)
XGA @ (60/70/75/85) / SXGA @ (60/75/85) /
UXGA @ 60/WXGA @ (1280x800)
WSXGA @ 60(1680x1050)
WUXGA @ 60(1920x1200)/1360x768
480i/p @ 50/60Hz
576i/p @ 50Hz
720p @ 50/60Hz
1080i @ 50/60Hz
1080p @ 50//60Hz
COMPONENT YPbPr 480p @ 50/60Hz
576 @ 50Hz
720p @ 50/60Hz
1080i @ 50/60Hz
1080p @ 50//60Hz
YCbCr 480i @ 60Hz
576i @ 50Hz
Composite /
S-Video
YUV /
Y-C
480i @ 60Hz
The Home Theater Scaler Plus accepts component, PC and HDMI inputs with audio on
each. The formats supported by these inputs are as follows:
4
When connecting to a component source (either SD or HD resolution) use a 3RCA to
3RCA cable to connect the YPbPr or YCbCr output of a DVD or Set Top Box to the
y-Cb/Pb-Cr/Pr input connector of the Home Theater Scaler Plus.
When connecting to an DVI source, use an DVI to HDMI cable (or adaptor) to connect
the DVI output of a STB or DVD to the HDMI input connector of the Home Theater
Scaler Plus.
The Home Theater Scaler Plus can automatically detect the input resolution of all three
inputs.
When connecting to a HDMI source, use an HDMl cable to connect the HDMl output of
a STB or DVD to the HDMI input connector of the Home Theater Scaler Plus.
The Home Theater Scaler Plus can automatically detect the input resolution of all four
inputs.
