6
OPERATING THE COMPOSITE & S-VIDEO TO HDMI SCALER
Both the Composite and S-Video inputs can be connected at the same time but
only one source can be viewed at one time. To switch between the Composite and
S-Video inputs, press the - button located on the front panel of the unit.
The Composite & S-video to HDMI Scaler has a built in GUI for navigating the
various functions. The GUI is navigated by the front panel buttons or the optional
GTV-SR-IR remote control (sold separately).
CONNECTING AND OPERATING THE
COMPOSITE & S-VIDEO TO HDMI SCALER
How to Connect the Composite & S-Video To HDMI Scaler
Connect the composite or s-video source to the scaler using user supplied 1.
cables.
Connect the audio source (digital or analog) to the scaler using user supplied 2.
cables.
NOTE: The Composite & S-video to HDMI Scaler will cross convert between
some digital and audio formats. All audio outputs (HDMI, digital TOSLINK, and
analog stereo mini-jack) will be active. Composite & S-video to HDMI Scaler will
not, however, down-mix multi-channel audio formats to 2 channel analog stereo.
Please see the chart below to see if audio will be heard out of a particular output
based on the audio input format.
INPUT ►
TOSLINK
2 CHANNEL
LPCM
TOSLINK
DOLBY DIGITAL
& DTS
ANALOG
STEREO
2 CHANNEL
OUTPUT ▼
HDMI YES YES YES
TOSLINK YES YES YES
ANALOG
STEREO
MINI-JACK
YES NO YES
Connect the HDMI display to the scaler using a user supplied HDMI cable.3.
Connect the desired audio output to the desired audio device using user 4.
supplied cables.
Connect the included 5V DC power supply to the scaler.5.
NOTE: Once the unit is connected and powered, the displays native resolution
will be detected and set as the output on the Composite & S-video to HDMI
Scaler.
