A SERVICE OF

logo

5
CONNECTOR DESCRIPTIONS
1 BNC Output Connector
Connect the Receiver to the input of the SDI display.
2 ST Fiber Connector Input
Connect the ST-terminated ber cable to this connector.
3 5 V DC Power Supply Connector (Receiver)
Connect this cable to the included 5 V DC power supply.
4 BNC Input Connector
Connect the Sender to the output of the SDI source.
5 ST Fiber Connector Output
Connect the ST-terminated ber cable to this connector.
6 5 V DC Power Supply Connector (Sender)
Connect this cable to the included 5 V DC power supply.