A SERVICE OF

logo

19
RMT-4IR REMOTE CONTROL DESCRIPTION
Pressing on each numbered selection buttons will switch the receiver to the
corresponding HDMI Input source. Each input can have up to 2 sources connected
(A and B). Each press of a input button will toggle between the A and B source. The
LED will blink each time a button press is detected.
RMT-4IR Button Source
1 Toggle 1A and 1B
2 Toggle 2A and 2B
3 Toggle 3A and 3B
4 Toggle 4A and 4B
LED Indicator
Input Selection
Buttons