7
RECEIVER PANEL DESCRIPTIONS
Brightness Trim Pot1
Use this adjustment Trim Pot to brighten/darken the output video signal. See
page 9.
Focus Trim Pot2
Use this adjustment Trim Pot to focus/blur the output video signal. See page 9.
Power LED Indicator3
This LED will become active once the included 5V DC power supply is properly
connected.
5V DC Power Input4
Connect the included 5V DC power supply input this port. Once this has been
properly connected the power LED will become active.
3 RCA Component Output 15
Connect one component display device to this output.
3 RCA Component Output 26
Connect one component display device to this output.
2 RCA Analog Stereo Output 17
Connect this output to either the display or audio receiver.
2 RCA Analog Stereo Output 28
Connect this output to either the display or audio receiver.
SPDIF Digital Audio Output 19
Connect this output to either the display or audio receiver.
SPDIF Digital Audio Output 210
Connect this output to either the display or audio receiver.
Optical Digital Audio Output 111
Connect this output to either the display or audio receiver.
Optical Digital Audio Output 212
Connect this output to either the display or audio receiver.
RJ-45 Jack13
Connect the sending and receiving units together using a TIA/EIA-568-B
terminated CAT-5, CAT-5e or CAT-6 cable. See page 10.
