A SERVICE OF

logo

Installation:
NOTE: The pictures shown in the User’s Manual are for demonstration purposes only. Your computer or product may look slightly different.
1. Turn on your computer.
2. Take out the USB Cable from the bottom of your USB Hub. After Windows
®
has loaded, connect the USB Cable on your USB Hub to
an available USB port on your computer.
Your USB Hub comes with an additional USB Power Cable. The use of this USB Power Cable is recommended for additional power if
multiple devices or high power consumption devices such as Micro Drives or Bus Powered USB devices are connected to your USB
Hub. To connect your USB Hub with the enclosed USB Power Cable, please refer to the diagram shown below:
3. Your computer will detect and install the necessary drivers for your USB Hub automatically. Once the installation is complete, your USB
Hub will be ready to be used.
NOTE: If you are experiencing any difficulties with your USB Hub, please refer to the Troubleshooting section in this manual.
4