A cordless handset will not operate until it is registered to the base.
During the registration process, keep the handset near the base.
Up to cordless handsets can be registered to one base.
Not Register
Unavailable
1. Make sure your phone is (not in talk mode).
. Press the button to go to the main menu and use
( + or - ) button to scroll to Registration.
. Press button to conrm and you may program the
following items: Register and Remove handset.
1. Press the ( + or - ) button to scroll to the Register sub-
menu.
. Press button to enter the menu.
. Press and hold the button on base for 5 seconds.
. The charge/in use indicator will ash slowly for minutes which
shows the base is in registration mode.
5. If the registration is successful, the handset shows Successful
and emits a conrmation tone for seconds.
6. If the registration is failed (i.e. timeout), the handset shows “No
base” and emits an error tone.
