18 GPSMAP 392/398/492/498 Owner’s Manual
BASIC OPERATION > ROUTES
ADD appears below the map
pointer as you insert points.
To create a route using the Route list:
1. Press and hold ADJ/MENU to show the Main Menu.
2. Use the ROCKER to highlight the Route tab, and press
ADJ/MENU to show the Route Options menu.
3. Select New Route, and press ENTER.
4. Press ADJ/MENU, select Use List, and press ENTER.
5. Use the ROCKER to highlight the first available blank route
slot, and press ENTER.
6. Select a category, press ENTER, and select the first point in
your route.
7. Repeat steps 5 though 6 until your route is complete, and
then press QUIT.
Choose the category from which you
want to add a route point.
To navigate a saved route:
1. From any page, press NAV.
2. Use the ROCKER to highlight Follow Route, and press
ENTER.
3. Highlight Pick From Saved List, and press ENTER.
4. Highlight the route you want to navigate, and press ENTER.
To stop navigation of a route:
Press NAV, highlight Stop Navigation, and press ENTER.
