35
More on Photography
Bracketing
Automatically vary settings over a series of pictures.
1
Press the DRIVE button to display drive options and press the selector up or down
to highlight one of the following:
Option
Description
AE BKT
Press the selector left or right to highlight a bracketing amount. Each time the shutter
button is pressed, the camera will take three shots at up to about 6 fps: one using the
metered value for exposure, the second overexposed by the selected amount, and the
third underexposed by the same amount (regardless of the amount selected, exposure
will not exceed the limits of the exposure metering system).
ISO BKT
Press the selector left or right to highlight a bracketing amount. Each time the shutter
is released, the camera will take a picture at the current sensitivity (P 48) and process it
to create two additional copies, one with sensitivity raised and the other with sensitivity
lowered by the selected amount (regardless of the amount selected, sensitivity will not
exceed ISO 6400 or fall below ISO 200).
FILM
SIMULATION
BKT
Each time the shutter is released, the camera takes one shot and processes it to create
copies with the lm simulation settings selected for X FILM SIMULATION BKT in the
shooting menu (P 68).
DYNAMIC
RANGE BKT
Each time the shutter button is pressed, the camera takes three shots with di erent
dynamic ranges (P 68): 100% for the rst, 200% for the second, and 400% for the third.
The shots are taken at rates of up to about 6 fps. While dynamic range bracketing is in
e ect, sensitivity will be restricted to a minimum of ISO 800; the sensitivity previously in
e ect is restored when bracketing ends.
AE BKT
±
1
±
2
/
3
±
1
/
3
Press MENU/OK to select the highlighted option.
2
Take photographs.
