COOL DOWN PERIOD
To ensure safe food storage, allow the refrigerator to operate with the doors closed for at bast 6 hours before loading it
with food,
REFRmGERATOR & FREEZER CONTROLS
NOTE: When changing control settings, wait 24 hours before making additional adjustments,
After 24 hours, adjust the controls as
needed, Make your adjustments small
and gradual; allowing time for
temperatures to change and stabilize,
Refer to the adjacent guidelines for
The range of possible settings is 1
through 9, with 9 being the coldest,
Both the Freezer and Fresh Food
compartments are preset at the factory
to 5, the midpoint temperature setting,
Toadjust the temperature to a higher or
lower setting, press the Warmer or
Colder button closest to the display, The
first time you press the button, the
display shows the last setting you
entered, Each press of the button after
that increments the setting by one,
The display shows your new setting
momentarily, then changes back to the
iF THE TEMPERATURE
DISPLAYS FLASH...
if ever you see both temperature displays
continously flashing, it may indicate that
the control system has detetcted a
performance problem. Call your Frigidaire
service representative, who can interpret
the flashing message.
To maintain temperatures, a fan
circulates air in the refrigerator and
freezer compartments, For good
circulation, do not block cold air vents
with food items,
Temperature Adjustment Guide
If Fresh Foed compartment is too warm
If FreSh FoOd c0mpartment is too c0id
If Freezer Compartment is too warm
If FreeZer Compartment is too Cold
Adjust Fresh Food control one number
higher by pressing the Colder button.
Adjust Fresh Food control one number
lower by pressing the Warmer button.
Adjust Freezer control one number higher
by pressing the Colder button.
Adjust Freezer control one number lower
by pressing the Warmer button.
