Maintenance
Cleaning
Clean Mufer and Rear
Frame Area
Service Interval: Before each use or daily
Stop engine, wait for all moving parts to stop, and
remove key. Engage parking brake.
WARNING
Operating engine parts, especially the
mufer, become extremely hot. Severe burns
can occur on contact and debris, such as
leaves, grass, brush, etc. can catch re.
• Allow engine parts, especially the mufer,
to cool before touching.
• Remove accumulated debris from mufer,
exhaust diverter, and engine area.
Clean Rear Screen In Hopper
Service Interval: Before each use or daily
1. Stop engine, wait for all moving parts to stop, and
remove key. Engage parking brake.
2. Open door and remove clippings that are stuck
to the screen.
Clean Blower
Service Interval: Yearly or before storage
Grass build up may cause problems with the impeller
when the unit is put back into operation.
1. Stop engine, wait for all moving parts to stop, and
remove key. Engage parking brake.
2. Remove grass buildup from around the impeller
before placing it in storage.
24
