A SERVICE OF

logo

MENU
a
a
a
a
abc
94
93
17
18
Getting Started Getting Started
1-23 1-24
To stop the print test: 1.11 Connection to a Computer
1. (93) 7 PRINT TEST 1 * Parallel/Serial Interface
2. [Z] 7 SELF TEST 6 - Connect the interface cable coming from the computer to the printer's parallel
3. (93) READY 4 ELQ - The printer is set by default to SHARED interface with the following parame-
- Switch the printer and computer OFF.
(17) or serial port (18).
ters:
- 8 Kbyte buffer,
- 8 bit,
- even parity,
- 9600 baud and
- DTR protocol.
SHARED means that, after Power-ON, both the serial and the parallel interfaces
are available for data transfer. The port to which data is sent becomes active
automatically. If the parallel or serial parameters need to be changed, see
Chapter 2, Menu Mode, and Appendix A, Interface Description.