A SERVICE OF

logo

Replacing the Lamp
How to replace the lamp
User's Guide "Replacing the Lamp"
You will need the provided accessory screwdriver or another flathead screwdriver.
Turn off the power, wait for the cool down period to end (about
30 seconds) then disconnect the power cable.
Remove the cover when the projector has sufficiently cooled
down. It takes about a further one hour from when the cool
down period has finished for the lamp to be cool enough.
Disconnect the
power cable.
Remove the lamp
cover from the
underside of the
projector.
Insert the screwdriver into the opening.
Slide the lamp cover until the [ ] and [ ] marks line up, then
lift up the lamp cover to remove it.
1
2