Engine-Generator Details
• Voltage: Phase to phase; Phase to neutral
• Current for each phase.
• Kilowatts and kilowatt hours total.
• Frequency and power factor.
• Status and control of four digital outputs which can be
customized by the user.
• Status of eight digital inputs.
• “Alarm Enabled” selection. These alarms flash the
“engine-generator” icon on the summary screen.
• Digital inputs for engine malfunctions are derived
from engine mounted sensors (supplied by others).
Power Manager Detail Screen
• Voltage: phase to phase; phase to neutral and
voltage unbalance.
• 3 phase currents and neutral (optional).
• Frequency.
• Kilowatt hours - normal and emergency.
• Status and control of four relay outputs.
• Status of eight digital inputs.
• Device ratings: CT and PT ratio.
Transfer Switch Detail Screen
• ATS rating and identification data is displayed.
• Allows remote testing and time delay bypass.
• Voltage, frequency, phase sequence, voltage unbalance
and time delay settings can be checked.
• Viewing of engine exercise schedules.
• Displays phase to phase voltage on normal and
emergency.
• Provides complete system status message from
7000 series microprocessor controller.
• View event log on the last 99 events for each ATS.
• Arrange test schedules for transfer switches.
• Provides for monitoring of local site or remote sites.
Page 19
Ver.
Voltage P.U.
Voltage D.O.
Freq P.U.
Freq D.O.
Volt Unbal P.U.
Volt Unbal D.O.
Event Logging (Max. 99 Entries)
