A SERVICE OF

logo

Connecting with external Speaker
Both unit A and unit B can be connected with external speaker.Please see the following
illustration.
AMPLIFIER
TV
SUBWOOFER
Left front speaker
Right front speaker
Center speaker
Left rear speaker
Right rear speaker
Note:
There is no 5.1 channel in the unit, however,after connecting to APM it is available to output
audio in 5.1 channel.
AUDIO INVIDEO IN
AV CABLE
Not supplied
AV OUT
SD
AV OUT
SD
AV OUT
SD
Connecting to Unit A/B
1.Connect unit A and unit B with AV cable.
2.Connect the unit to power by AC/DC adapter or cigarette light adapter
3.Turn on these two units, insert a disc into the disc compartment of the main unit A,
press the IN/OUT key on remote control B to change Unit B to AV IN mode, then you
can see the same image on both units.
Please refer to the illustration below.
Connecting to TV
You can connect unit A or unit B with TV to enjoy high quality picture and stereo sound.
Please refer to the following illustration:
Please use AV cable to connect the machine and the TV. Make sure it is connected
correctly.
TV
AUDIO IN
VIDEO IN
AV CABLE
Not supplied
AV IN/OUT
SD
76