Dell E6400 Manual

A SERVICE OF

next previous

Back to Contents Page

 Modular Drive

Dell™Latitude™E6400andE6400ATGand

MobileWorkstationPrecision™M2400ServiceManual

Removing the Modular Drive

Replacing the Modular Drive

The modular drive supports either a second hard drive, an optical drive, or a an air bay for travel.

Removing the Modular Drive





1. Follow the procedures in Before Working on Your Computer.



2. Turn your computer upside down.



3. If your computer has a security screw for the modular drive, remove the security screw.



4. Push the release latch in to release it.



5. Use the release latch to slide the drive out of the modular bay.

Replacing the Modular Drive





1. Slide the drive in the modular bay.



2. If your computer has a security screw for the modular drive, replace the security screw.



3. Follow the procedures in After Working on Your Computer.

Back to Contents Page



CAUTION: Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer.

NOTE: The security screw on the modular drive is optional and may not be installed on your computer.

1

security screw

2

modular bay

3

modular drive

4

release latch

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer.

NOTE: The security screw on the modular drive is optional and may not be installed on your computer.