CUSTOMER RESPONSIBILITIES
FILL iNDATES ._'_'_/.. _ _/.. I}__"/_ ._..""_..._"_-i_.,5"_ ''
AS YOU COMPLETE /__,_'_O_,_ _ _._'_ _'_ _ R_d'_/_
REGULAR SERVICE _'_,f,_//'_.,,'/'_,_r S Ea Vl C E DATES
Check Brake Operation [ I_ I_
Check Tire Pressure _
Check Operator Presence and
T Intedeck Systems I_
R CheckforLooseFasteners I1_ If7 II_
A Sharpen/Replace Mower Blades i4
T Lubrication Chart I_
0 CheCk Battery Level
R C_ean Battery and Terminals
Check Transaxle Cooling I_
Adjust Blade Bait(s) Tension I_s
AdjuSt Motion Drive Bert(s) Tension _'5
Check Engine Oil Level I1_ ll_
Change Engine Oil I_1_,: I_
E CleanAirFilter
N CleanAirScreen
_1_ Inspect Muffler/Spark/vrester I1_
Replace Oil Fi_ter(If equipped) _,:
N Clean Engine Cooling Fins _2
Replace Spark PJug I_
ReplaCe Air Filter Paper Cartridge Id/_ I
Replace Fuel Filter
1 ChangemoreoftenwhenoperatJngunde_'aheawIo_:lo(inhighaml_enttempe_ures 5-1fequippedWlthsdjust_system.
2 - Service more often wilen ope_atiflg in diriy otdusty conditions 6 - Not required ifequipped with maint_ance-fme batter,/.
3 - If equipped with oil flttar, change oil _ery 50 _ours. 7 - _ghten front axle pivot bcltto35 ft_bs maximum¸
4 - Replace blades more ofl_ when mowing insandy SOil. Do not ovedighten.
GENERAL RECOMMENDATIONS
The warranty on this tractor does not ._ Spindle
cover items that have been subjected to Zerk F';"
operator abuse or negligence. To receive - , L.
P, Front ----'r-, r
full value from the warranty, operator must Wheel _'_.
maintain tractor as instructed in this Bearing
manual. Some adjustments will need to zerk -_
be made periodically to properly maintain
your tractor. _ !
All adjustments in the Service and Adjust- ,"
ments section of this manual should be _'
checked at least once each season, i
• Once a year you should replace the =
spark plug, clean or replace air filter, _._.
and check blades and belts for wear. A '- .....
new spark plug and clean air filter as-
sure proper air-fuel mixture and help
your engine run better and last longer.
BEFORE EACH USE
• Check engine oil level.
• Check brake operation.
• Check tire pressure.
• Check operator presence and interlock
systems for proper operation.
• Check for loose fasteners.
LUBRICATION CHART
_ _--Spindle Zerk _.
.:::=:::::::. W-._..__FrontWheeL_
'__J Bearing Zerk
Engine_,
~..÷.-
._ General Purpose Grease
A Refer to Maintenance "ENGINE"
Section
IMPORTANT: Do not oil or grease the pivot
points which have special nylon bear-ings.
Viscous lubricants will attract dust and dirt
that will shorten the life of the self-lubricat-
ing bearings. If you feel they must be
lubricated use only a dry, powdered
graphite type lubricant sparing y.
18
