A
AA
A
T1500 Windows-Based Terminal
T1500 Windows-Based Terminal T1500 Windows-Based Terminal
T1500 Windows-Based Terminal
Quick-Start Instructions
Quick-Start InstructionsQuick-Start Instructions
Quick-Start Instructions
The T1500 Windows-Based Terminal is shipped from the factory configured for
local boot. Instructions are included in this appendix to convert to network boot if
you require this mode of operation.
If you require additional network services for a local-boot (default) terminal, you
must use the server setup procedure. This procedure starts with Chapter 1 of this
document.
- OR -
If you change the terminal to boot from a network server, you must perform the
complete server setup procedure that starts with Chapter 1 of this document.
Note
NoteNote
Note
If the site has a DHCP server and the terminal
connects through the network port, except for power
and interface cable connections the administrator can
perform all of the setup functions from a remote server.
Refer to
T1500 Windows-Based Terminal Client
Manager
on the
Software and Documentation
CD
(requires Adobe Acrobat Reader). If the site has a
DHCP server and the terminal connects through the
network port, except for power and interface cable
connections the administrator can perform all of the
setup functions from a remote server. Refer to
T1500
Windows-Based Terminal Client Manager
on the
Software and Documentation
CD (requires Adobe
Acrobat Reader).
