A799 Programming Guide
Contents
6 Revision D 12/09
A799-PG00001D
Graphics .............................................................................................64
Download BMP logo ........................................................................................64
Select bit image mode ....................................................................................65
Print advanced raster graphics .....................................................................66
Select single-density graphics ...................................................................... 66
Select double-density graphics ...................................................................66
Select the current logo .................................................................................... 67
Dene downloaded bit image ...................................................................... 68
Print downloaded bit image .........................................................................69
Print raster graphics ......................................................................................... 69
Print raster monochrome graphics (ColorPOS
®
) .....................................70
Print raster color graphics (ColorPOS
®
) ......................................................70
Download logo image (ColorPOS
®
) ............................................................. 71
Print Flash Logo .................................................................................................. 71
Dene Flash Logos ............................................................................................71
Apply shading to logo (ColorPOS
®
) ............................................................ 72
Merge watermark mode (ColorPOS
®
) ......................................................... 72
Monochrome shade mode (ColorPOS
®
) ....................................................72
Color shade mode (ColorPOS
®
) .....................................................................73
Logo print with color plane swap (ColorPOS
®
) ........................................ 73
Form and merge real time surround graphic (ColorPOS
®
) .................. 73
Save graphics buer as logo (ColorPOS
®
)..................................................74
Background logo print mode (ColorPOS
®
) ................................................ 74
Apply margin message mode (ColorPOS
®
) ...............................................75
Shade and store logo (ColorPOS
®
) ...............................................................75
Logo print with knife cut ............................................................................... 76
Set temporary max target speed ................................................................. 76
Set LogoEZ
®
colorization ................................................................................. 77
Set LogoEZ
®
attribute mapping .................................................................... 79
Convert 6-dots/mm bitmap to 8-dots/mm bitmap .............................. 81
Enable constant speed logos ........................................................................ 81
Status .................................................................................................82
Status command introduction .....................................................................82
Batch mode .........................................................................................................82
Transmit peripheral device status (RS-232C printers only) ................82
Request alternate status (A793 emulation only) .................................... 83
Transmit paper sensor status ........................................................................83
Transmit printer ID ............................................................................................84
Transmit printer ID, remote diagnostics extension ............................... 85
Transmit status ...................................................................................................87
Send printer software version.......................................................................88
Real time commands .........................................................................89
Preferred implementation .............................................................................. 89
Alternate implementation .............................................................................89
Rules for using real time commands ..........................................................89
Moving data through the buer ..................................................................90
Busy line and fault conditions ....................................................................... 90
Real time status transmission .......................................................................90
