The coaxial digital output provides a digital audio signal via a 75
cable equipped with RCA-type connectors. Connect this output to a
corresponding coaxial digital input on your preampli–er/processor.
The AES/EBU output provides a digital audio signal via a 110
cable equipped with XLR-type connectors. Connect this output to a
corresponding AES/EBU digital input on your preampli–er/processor.
The optical digital output provides a digital audio signal via a standard
™∆) optical cable. Connect this output to a corresponding
Toslink™∆) optical cable. Connect this output to a corresponding Toslink
optical digital input on your preampli–er/processor.
Making any one of these connections allows you to feed the signal in its
digital form directly to your A/V preampli–er for further digital processing.
Your Classé player includes two
-inch mono mini-jacks in order to
support the infrared (IR) remote controls that are ubiquitous today.
Infrared commands exist (for example) for toggling the player between
, in addition to discrete command codes for either
standby, in addition to discrete command codes for either standby
. These codes may be used in ≈macros∆ for sophisticated
remote control systems, facilitating the control of the player in the larger
context of a complete system.
The list of commands available is quite extensive, enabling even complex
(chains of commands strung together) to operate —awlessly. If this
macros (chains of commands strung together) to operate —awlessly. If this macros
capability is of interest to you, we strongly recommend discussing it with
your authorized Classé dealer.
is a bit of a misnomer: the input and
IR Input and Output is a bit of a misnomer: the input and IR Input and Output
in nature, not infrared. They are used
electrical in nature, not infrared. They are used electrical
with standard IR receivers, distribution ampli–ers, and emitters (available
from your dealer) to translate the remote»s IR signal to an electrical signal
. The big advantages here include being able to easily route
the signals anywhere they might need to go and the reliability of a solid
Since an IR distribution system such as your dealer may design for you
usually must control many products, your player includes both an IR input
(for the control of this product) and an IR output (so as to pass along the
same signal to the next product). This allows you to ≈daisy chain∆ your
control wires from one product to the next.
