2 3
13
Assemble the side burner shelf (DA) to the left upper side panel
(EA) using hardware #1, #2, #3 (X3) and #4, #5 and #6 (X2).
Assemble the side shelf (DI) to the right upper side panel (EB) by
using the same hardware above.
DO NOT FULLY tighten all screws while assembling. Make sure the
shelves are well fitter with the side panels before tightening.
14.1
screws and nuts attached to the valve bracket #4, #5 and #6 (x2),
and guide through the side burner shelf control panel. Attach the
control knob (CI) to the valve stem with the triangle sign, on the
knob, pointing upwards. Insert the side burner (DE) into the side
burner drip pan (DG). Gently place the burner over the orifice of
the valve. Place the side burner grate (DD) in position as shown.
Fig. 13
Fig. 14.1
(fig.14.2).
