Page 4SKU 97548 For technical questions, please call 1-800-444-3353.
4. Bleed the hydraulic system of the
Bottle Jack before its initial use.
5. Always place the Bottle Jack on a dry,
oil/grease free, solid, level oor surface
capable of supporting the weight of the
Jack and all other additional tools and
accessories.
6. Apply the vehicle’s parking brake
and chock the tires before lifting the
vehicle.
7. Lift the vehicle only by the
manufacturer-recommended lifting
points.
8. Stay out from under the load while it is
being lifted or supported.
9. Avoid rapid load descent. Turn the
Release Screw slowly.
10. Do not use for aircraft purposes.
11. Do not leave the tool unattended when
it is connected to a compressed air
supply. Release the tool’s load, and
disconnect it from its compressed air
supply before leaving.
12. This product is not a toy. Keep it out of
reach of children.
13. When lifting only one wheel, make
sure to support the load immediately
with one jack stand (not included)
placed under the side of the vehicle
being lifted. Align the saddle of the
jack stand directly under the vehicle’s
seam or recommended lifting point.
14. When lifting the entire front end or
rear end of a vehicle, make sure to
support the load immediately with two
jack stands. Align the saddles of the
jack stands directly under the vehicle’s
frame or recommended lifting points.
Also, make sure the jack stands are
adjusted at the same height.
15. Use the Bottle Jack only on vehicles
whose frames have lifting points (on
its seam or frame) capable of aligning
with the Bottle Jack.
16. Do not use the Bottle Jack with the
vehicle’s engine running. When
running, the vehicle’s engine produces
carbon monoxide, a colorless,
odorless, toxic fume that, when
inhaled, can cause serious personal
injury or death.
17. Always keep hands, ngers, and feet
away from all moving parts of the
Bottle Jack when applying or releasing
a load. Remain clear of the vehicle
being raised or lowered. People and
animals should be kept at a safe
distance when using the Bottle Jack.
18. Do not allow anyone in the vehicle
when using the Bottle Jack. Keep all
bystanders a safe distance away from
the vehicle.
19. Never support both ends of the vehicle
at the same time.
20. Before lowering the Bottle Jack,
make sure tool trays, jack stands,
and all other tools and equipment are
removed from under the vehicle
21. The warnings, precautions, and
instructions discussed in this
instruction manual cannot cover all
possible conditions and situations that
may occur. It must be understood
by the operator that common sense
and caution are factors which cannot
be built into this product, but must be
supplied by the operator.
SAVE THESE
INSTRUCTIONS.
